Oil, Gas and Mining Fleet Management

Prevent accidents, increase operational visibility, ramp up productivity, master compliance and digitalise admin, reporting and operations in your oil, gas and mining fleet.

Trusted by oil, gas and mining industry leaders:

Prevent accidents and increase fleet safety

Stop speeding and distracted driving, gamify safety, ensure supervisors are on-site, increase driver visibility, and record, score and coach drivers.

Prevent your drivers from speeding

Equip your oil, gas and mining fleet with a speed monitor that buzzes to alert drivers the moment they exceed set road speed limits to warn them so they can slow down and prevent accidents.

Tackle distracted driving behaviour

Prevent high-risk driving with AI cameras designed to alert drivers when smoking, fatigue, cellphone use and other distracted driving behaviour is detected to help prevent accidents and increase fleet safety.

Rate, reward and gamify good driving

View valuable driver behaviour insights and ratings so you can set a benchmark for driver safety in your oil, gas and mining fleet to help promote, reward and gamify good driving.

Verify that necessary staff are on-site

See exactly where your vehicles are at any time with GPS tracking technology to confirm that the relevant personnel are physically present on-site to ensure correct safety measures are followed.

Eliminate blind-spot-related accidents

Put exterior cameras and in-cab monitors in your drivers’ vehicles to increase their visibility and give them a 360-degree view of their surroundings so they can avoid blind-spot-related incidents.

Coach drivers with scorecards and footage

Use driver scorecards to see where high-risk driving occurs and video-recorded footage to coach drivers on where they are going wrong so you can help them improve and apply safer driving practices.

Give drivers panic buttons for emergencies

Equip each of your mining, oil and gas fleet vehicles with a panic button, allowing drivers to push it in emergencies to receive an immediate response from managers for assistance.

Magnify operational visibility and productivity

Prevent asset loss, track non-powered equipment, see exact working hours, monitor on-site productivity, and equip staff with instant communication tools.

Protect your assets from theft or loss

Use GPS tracking software in your fleet to instantly track and locate your oil, gas and mining fleet, on and off-site to avoid losing assets or wasting valuable time searching for them.

Track and monitor non-powered asset usage

Put a tracking device in your non-powered assets and receive full data activity reports and daily alerts so you can geolocate them and see how they are being used to monitor productivity.

Confirm start and end times on-site

Pinpoint the exact location of your oil, gas and mining fleet and receive a full rundown of their trip history using GPS tracking software so you can confirm that your fleet was on-site at the correct times.

Monitor working hours and productivity on-site

Receive alerts when vehicles enter or exit areas on-site with geofence technology and use PTO sensors to monitor the hours your equipment is being used to ensure productivity.

Make back-office and on-site communication instant

Equip your vehicles with an in-cab-auto answer communication device allowing your back-office team and on-site personnel to instantly communicate with each other to guarantee quicker responses on important tasks.

Yeo Ching Wei, General Manager of TSH Gas Pte Ltd

”Cartrack gave us the visibility we needed to protect our drivers and road users. The data doesn’t lie - it has helped us build a safer fleet culture and instil stronger driver accountability.”

Skyrocket machine up-time and utilisation

Reduce fleet maintenance downtime, dispatch your nearest driver for jobs, monitor fuel levels, increase asset usage, and pre-book vehicles.

Increase fleet health and prevent downtime

Receive automated preventive fleet maintenance reminders and engine diagnostic alerts so you can ensure your oil, gas and mining assets remain well-maintained to avoid unnecessary downtime.

Locate and dispatch your nearest driver

Get a map view of the nearest driver’s location in real time so you can quickly assign the closest qualified driver to an urgent job, helping your oil, gas and mining business save time, money and resources.

Monitor fuel levels in real time

Track your fuel usage in real time with kilometre-per-litre reporting, view graphs of consumption levels, compare rates to competitor industries, pinpoint fuel wastage and validate fuel claims to maximise utilisation.

Elevate and monitor asset utilisation

See exactly how often your oil, gas and mining assets are being utilised by working hours or mileage to gauge where assets are being over or under-used so you can make the necessary changes to boost productivity.

Pre-book vehicles to optimise fleet usage

Instantly view the availability of your oil, gas and mining vehicles and pre-book them for projects to guarantee their usability so you can avoid any delays and ensure fleet up-time is maximised.

Control, manage and master compliance

Prevent unauthorised asset usage, monitor working hours, ensure operations only run during regulated times and in approved zones, and stop alcohol-impaired staff operating assets.

Prevent unauthorised asset usage

Equip your fleet with a keypad device and give each driver a unique code to insert to operate the vehicle, and pair this with ignition-prevention technology, ensuring only authorised staff use your machinery.

Keep operations in approved zones

Create virtual perimeters around operational zones to receive alerts when your mining, oil and gas vehicles enter or exit these areas, ensuring operations remain within approved boundaries.

Ensure projects run within regulated times

Give your staff unique ID tags and make it mandatory for them to tap them at the start and end of their shifts so you can track operational hours and ensure no projects are running outside of regulated times.

Stop your staff from DUI

Use a breathalyser device with alcohol interlock technology on all your mining, oil and gas vehicles to prevent your staff from operating any of your assets under the influence of alcohol.

Monitor driver hours of service for compliance

Get real-time insight on drivers’ service hours, rest periods and trip history to ensure they’re not overworking and getting enough rest to perform jobs without putting themselves and others at risk.

Digitalise operations, admin and reporting

Manage fleet costs, vehicle inspections and maintenance logs digitally, receive automated reminders and alerts, and view insights on a customisable dashboard.

Complete driver vehicle inspections digitally

Allow your mining, oil and gas drivers to complete pre- and post-vehicle inspections digitally so they can take more accountability and alert managers in advance of any vehicle defects or mechanical issues.

Accelerate operations with digital dashboards and reports

Set up your digital dashboard to view all your fleet’s daily needs and insights, and get automated fleet reports inboxed to you at preferred intervals to simplify and digitalise daily operations.

Stay on track with automated reminder alerts

Have timely notifications for vehicle services, tyre rotations, license renewals and other fleet tasks sent to you in real-time so you can easily manage your fleet’s admin and save time.

Conduct maintenance logs digitally

Automate your mining, oil and gas fleet’s maintenance logs so you have digital records of your assets’s service history to identify recurring issues and ensure regular fleet upkeep.

Digitally manage every cent in your fleet

See and manage all your fleet's running costs like fuel, tolls, fines, tyres, maintenance, insurance, and more to help you stay updated on your fleet expenses and avoid penalty or downtime costs.

Have all your fleet alerts managed for you

Our command centre will receive, review, and resolve every fleet alert in real time, dialling in directly with your team to help you stay on track and compliant.

FREQUENTLY ASKED QUESTIONS (FAQ)

How does your solution handle the challenges of remote operations in oil, gas, and mining?

Cartrack’s platform is built for connectivity in even the most challenging environments. We offer features like satellite tracking, remote diagnostics, and offline data storage to ensure you maintain visibility and control over your fleet, regardless of location.

Can your system integrate with existing equipment and technologies we use?

Cartrack understands the importance of seamless integration. Our system boasts open architecture and utilises industry-standard protocols to connect with various sensors, telematics devices, and enterprise software you already have in place.

How does your fleet management solution address safety concerns specific to oil, gas, and mining?

Safety is paramount. Cartrack offers features like real-time driver behaviour monitoring, fatigue detection, and geofencing to proactively identify and mitigate potential risks. Additionally, our system can automate safety checklists and inspections, helping you ensure compliance and a safer work environment.

Will your platform help us optimise fuel consumption and reduce our environmental impact?

Yes! Cartrack’s system utilises advanced route optimisation algorithms and real-time traffic data to ensure the most efficient routes for your vehicles. Additionally, we track fuel usage and idling time, allowing you to identify areas for improvement and reduce your overall carbon footprint.

What kind of data security measures do you have in place to protect sensitive fleet information?

We prioritise data security. Cartrack’s platform utilises industry-leading encryption protocols and access controls to safeguard your fleet data. We also offer regular security audits and compliance certifications to ensure the highest level of protection.